Rheem® 83-25209-03 Suction Line Filter Drier, R-22, R-410A Refrigerant, 7/8 in Connection Size 1, 3 in Diameter
Rheem® 83-25209-03 Suction Line Filter Drier, R-22, R-410A Refrigerant, 7/8 in Connection Size 1, 3 in Diameter
| Connection Size 1 | : | 7/8 in |
| Connection Size 2 | : | 7/8 in |
| Connection Type 1 | : | Sweat ODF |
| Connection Type 2 | : | Sweat ODF |
| Dessicant Type | : | Activated Alumina/Activated Carbon/Molecular Sieve |
| Dessicant Volume | : | 16 cu-in |
| Diameter | : | 3 in |
| Function Type | : | Drier |
| Maximum Working Pressure | : | 650 psig |
| Packaged Depth | : | 7.9 in |
| Packaged Height | : | 3.2 in |
| Packaged Width | : | 3.2 in |
| Product Type | : | Drier |
| Refrigerant Type | : | R-22, R-410A |
| Shipping Weight | : | 1.7 lb |
| Width | : | 6-5/16 in |
The suction line filter drier method of cleaning up an HVAC system after a hermetic motor burnout is favored by service technicians and recommended by manufacturers throughout our industry. This Sporlan® AC filter drier gives the most practical and positive protection of the new compressor, since the refrigerant-lubricant mixture is filtered and purified just before it returns to the compressor. It is important that all contaminants remaining in the system be removed to prevent a repeat burnout of the new compressor.
Rheem® Suction Line Filter Drier, R-22, R-410A Refrigerant, 7/8 in Connection Size 1, Connection Type 1: Sweat ODF, 16 cu-in Dessicant Volume, 7/8 in Connection Size 2, Connection Type 2: Sweat ODF, Activated Alumina/Activated Carbon/Molecular Sieve Dessicant, 3 in Diameter, 6-5/16 in Width, 650 psig Maximum Working Pressure, Drier Function Type
- Premium product with activated alumina/activated carbon/molecular sieve desiccant
- Solid core
- Suitable for R454B refrigerant
- Filter dryer for use after a burnout or when major system work has been performed
- One pressure tap at the inlet end
- Corrosion resistant epoxy powder paint finish
- Solid copper fittings